|
| |
|
The
standard Aquasyn two-way valve is available in
sizes ¼" to 6" and can be supplied
in any number of configurations with options involving
body type, diaphragm type, end connections and
surface finish. Whether combined with our manual
bonnets featuring smooth operating high temperature
plastic handwheels or our pneumatic actuators,
Aquasyn's innovative design capabilities set us
apart.
Please see ordering information on page 16
for a range of options or contact us with any
special requirements you may have. |
 |
|
|
| |
| · |
BPE Compliant machined
bar stock bodies with controlled Sulfur |
| · |
Integral valve body
sealing ridge prevents entrapment
of process media |
| · |
Sizes from 1/4"
to 6" provide process application flexibility |
| · |
Exterior body surfaces
radiused and sloped promote cleanability by
wash-down or COP methods |
| · |
Fully traceable bodies
insure ease of validation / documentation |
| · |
Drain angle marks
etched on end connections insure self-draining
alignment |
| · |
Surface finishes available
from 25Ra to 5Ra, mechanical and electropolished |
| · |
Exotic materials including
Hastelloy AL6XN and Titanium available upon
request |
| · |
Hygienic clamp, butt
weld, orbital weld and special end connections
available
|
| |
| ¹Hastelloy
is a trademark of Haynes International |
| ²AL6XN
is a trademark of Allegheny Ludlum |
|
Please ask us how our extensive custom design and
fabrication capabilities can assist you in providing
unique solutions for your process requirements |
|
Our
two-way weir type diaphragm valves feature robust
construction, precision machining and state of
the art surface finishes, with ASME-BPE compliant
chemistry.
All
of Aquasyn's two-way and special configuration
valve bodies are machined from 316L austenitic
stainless steel bar stock.
Aquasyn
valves are fully traceable with Material Test
Reports (MTRs) and Heat Numbers provided as
standard.
|
|
|
|
